TeamKarim.com - High End Skates


	Leaning through short track turns on a properly bent blade is nothing less than exhilarating. The "grip" is dramatically improved. In fact, bent blades have become vital for competitiveness, but getting a blade with the proper curve isn't easy. Bending by hand, or even with a bending device is difficult and often inaccurate. Much trial and error is required. Until now. Introducing BigBend from Zandstra Sports, the new short track blade with an integrated bending system. With BigBend you can easily give the tube the bend that's right for your size and skill level today. And it's so simple, you can adjust the bend for tomorrow. So as you hit those turns faster and lower, you can adjust the curve to fit. This elegant system allows you to make fine adjustments using just an hex wrench. It's so easy, you could adjust it between heats. And it's so revolutionary, it's patented. Check out these features: Features: Very stiff tube, becomes stiffer with increased bending. No mushiness in turns, tube is extremely rigid. Runner is positioned left of center for a lower lean through turns. Solid aluminum plugs close the tube ends. Use for long track or short track. Ice friction is reduced due to the uniform bend. Bend adjustments are easy. Calibration is exact with the bend indicator or the optional bend checking device. Specifications: Bi-metal 1.10 mm Bi-metal 1.25 mm Chromeflex 1.25 mm Chromeflex 1.40 mm Contact Us

Leaning through short track turns on a properly bent blade is nothing less than exhilarating. The "grip" is dramatically improved. In fact, bent blades have become vital for competitiveness, but getting a blade with the proper curve isn't easy. Bending by hand, or even with a bending device is difficult and often inaccurate. Much trial and error is required.

Until now. Introducing BigBend from Zandstra Sports, the new short track blade with an integrated bending system. With BigBend you can easily give the tube the bend that's right for your size and skill level today. And it's so simple, you can adjust the bend for tomorrow. So as you hit those turns faster and lower, you can adjust the curve to fit.

This elegant system allows you to make fine adjustments using just an hex wrench. It's so easy, you could adjust it between heats. And it's so revolutionary, it's patented. Check out these features:

Features:

Very stiff tube, becomes

stiffer with increased bending.

No mushiness in turns, tube is extremely rigid.

Runner is positioned left of center for a lower lean through turns.

Solid aluminum plugs close the tube ends.

Use for long track or short track.

Ice friction is reduced due to the uniform bend.

Bend adjustments are easy.

Calibration is exact with the bend indicator or the optional bend checking device.

Specifications:
Bi-metal 1.10 mm
Bi-metal 1.25 mm
Chromeflex 1.25 mm
Chromeflex 1.40 mm